Maxim > Products > T/E Carrier and Packetized Communications > DS21Q352, DS21Q354, DS21Q552, ...

DS21Q352, DS21Q354, DS21Q552, DS21Q554

Quad T1/E1 Transceiver (3.3V, 5.0V)

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The quad T1 and E1 transceiver MCMs offer a high density packaging arrangement for the DS21352/DS21552 T1 single-chip transceivers and the DS21354/DS21554 E1 single-chip transceivers. Four silicon die of one of these devices is packaged in a multi-chip module (MCM) with the electrical connections as shown in Figure 1 in the data sheet. All of the functions available on the DS21352/DS21552 and DS21354/DS21554 are also available in the MCM packaged version however in order to minimize package size, some signals have been deleted. These differences are detailed in table 1 in the data sheet.

This data sheet describes the electrical connections and the mechanical dimensions only. Please see the DS21352/DS21552 and DS21354/DS21554 data sheets for full details on all of the features and the operating characteristics of the device.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 176kB)
Send this datasheet to any email addressE-Mail

Errata DS21Q552 21552A4.pdf
Errata DS21Q354 21354_Q354A4.pdf
Errata DS21Q352 21352_Q352A4.pdf
Errata DS21Q554 21554_Q554A4.pdf
Errata DS21Q354 21354_Q354C1.pdf
Errata DS21Q354 21354_Q354B2.pdf
Errata DS21Q352 21352_Q352B2.pdf
Errata DS21Q554 21554_Q554C1.pdf
Errata DS21Q552 21552_Q552B1.pdf

Key Features

  • Four completely independent T1 or E1 transceivers in one small 27mm x 27mm package
  • Each transceiver contains a short and long haul line interface plus a full featured framer with alarm detection/generation, elastic-stores, hardware based signaling support, per DS0 channel control and HDLC controller
  • Each multi-chip module (MCM) contains four die of
    • DS21352 (DS21Q352)
    • DS21552 (DS21Q552)
    • DS21354 (DS21Q354)
    • DS21554 (DS21Q554)
  • See the specific DS21352/DS21552 and DS21354/DS21554 data sheets for details on their feature set and operation
  • All four T1 or E1 transceivers can be concatenated into a single 8.192MHz backplane data stream
  • IEEE 1149.1 JTAG-Boundary Scan architecture
  • DS21Q352/DS21Q552 and DS21Q354/DS21Q554 are pin compatible to allow the same footprint to support T1 and E1 applications
  • 256-pin MCM BGA package (27mm X 27mm)
  • Low power 5V CMOS or low power 3.3V CMOS with 5V tolerant input and outputs
   
   

Key Specifications:

T/E Carrier & Packetized Products
Part Number Transmission Standard Functions Channels VSUPPLY
(V)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
max w/pins See Notes
DS21Q352  T1/J1 Framer + LIU 4 3.3
PBGA/256
729 $61.80 @1k
DS21Q354  E1 3.3
PBGA/256
$77.14 @1k
DS21Q552  T1/J1 5
PBGA/256
$77.14 @1k
DS21Q554  E1 5
PBGA/256
$77.14 @1k
See All T/E Carrier & Packetized Products (100)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

DS21Q352, DS21Q354, DS21Q552, DS21Q554: Schematic
Schematic

Application Notes

Application Note 309   Interfacing to the Fractional T1 and E1
Application Note 310   D4 Framing and Signaling
Application Note 336   Transparent Operation on T1, E1 Framers and Transceivers
Application Note 340   DS2153 Programming, ETS 300-011 Remote Alarm Generation
Application Note 345   DS21352/552, DS2151, DS2152, DS2141A, DS21Q42 Programming SLC-96
Application Note 351   T1/E1 and T3/E3 Transformer Selection Guide
Application Note 361   DS21354/DS21554 vs. DS2154 Single Chip Transceivers
Application Note 374   DS2155 vs. DS21x5y: Software and Hardware Considerations
Application Note 382   J1 Japanese Standards
Application Note 391   NRZ Applications
Application Note 393   E1 Operation of Dallas Semiconductor Framers and SCTs
Application Note 394   HDLC Configuration of Framers and Transceivers
Application Note 406   DS21Qx5y BSDL Scan Chain Mapping
Application Note 461   Programming and Controlling the FDL on DS2141A, DS2151
Application Note 590   Maxim® Telecommunications Frequently Asked Questions
Application Note 3121   Selecting a T1/E1/J1 Single-Chip Transceiver
Application Note 3208   Elastic Store Operation
Application Note 3349   T1/E1 Loopback Operation for Maxim T1/E1/J1 Transceivers
Application Note 3760   Interleaved Bus Operation

Product Guides

Communications (PDF)

Reliability Reports

Reliability Report: DS21Q352.pdf DS21Q354.pdf DS21Q552.pdf DS21Q554.pdf

Software/Models

DS21Q352 BSDL Model
DS21Q352 IBIS Model
DS21Q354 BSDL Model
DS21Q552 BSDL Model
DS21Q552 IBIS Model
DS21Q554 BSDL Model

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
DS21Q352    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q352B    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q352B+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q352DK    
Active DS21458DK

 
N/A;

Land Pattern: Not Available

0°C to +70°C See data sheet
DS21Q352N    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS21Q354    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q354B    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q354B+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q354BN    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS21Q354BN+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
DS21Q354C1    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q354C1+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q354DK    
Active DS21458DK

 
N/A;

Land Pattern: Not Available

0°C to +70°C See data sheet
DS21Q552    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q552+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q552BN    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS21Q552BN+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q552N    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS21Q552N+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q554    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
DS21Q554B    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q554B+    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256+3*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS21Q554BW    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS21Q554N    
Active   PBGA;256 pin;729 mm²
Outline Drawing:21-0307 (PDF)
Land Pattern: 90-0267 (PDF)
Use pkgcode/variation: V256-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All T/E Carrier & Packetized Products (103 Products)

Similar Products by Application

Telecom Line Cards: T1, E1, J1 > Single-Chip Transceivers: T1, J1 Only
Telecom Line Cards: T1, E1, J1 > Single-Chip Transceivers: E1 Only
Telecom Switches (PBX and Central Office) > T1/E1/J1 Single-Chip Transceivers (Framer + LIU)
Telecom Switches (PBX and Central Office) > T1/E1/J1 Framers
Telecom Switches (PBX and Central Office) > T1/E1/J1 Line Interface Units (LIU)
Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > T1/E1/J1 Single-Chip Transceivers (Framer + LIU)

Products with Similar Part Numbers

DS21Q41B Quad T1 Framer
DS21348, DS21Q348 3.3V E1/T1/J1 Line Interface
DS21Q348DK 3.3V E1/T1/J1 Line Interface Design Kit Daughter Card
DS21S07A SCSI Terminator
DS21Q44 Enhanced Quad E1 Framer
DS21Q43A Quad E1 Framer
DS21Q58 E1 Quad Transceiver
DS21Q55DK Quad T1/E1/J1 Transceiver Design Kit Daughter Card
DS21FF42, DS21FT42 4 x 4 16 Channel T1 Framer / 4 x 3 12 Channel T1 Framer
DS21Q59 E1 Quad Transceiver
DS21T07 SCSI Terminator
DS21Q50 Quad E1 Transceiver
DS21FF44, DS21FT44 4x3 Twelve Channel E1 Framer / 4x4 Sixteen Channel E1 Framer
DS21Q42 Enhanced Quad T1 Framer
DS2148, DS21Q48 5V E1/T1/J1 Line Interface
DS21T05 SCSI Terminator


Didn't Find What You Need?

Information Index

Rev 1; 1998-12-29
This page last modified: 2009-12-17


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products