CEPT Primary Rate Transceiver

Overview

Technical Documents

Ordering Info

User Comments (0)

All

Status

Active: In Production.

Description

The DS2181A is designed for use in CEPT networks and supports all logical requirements of CCITT Red Book recommendations G.704, G.706, and G.732. The transmit side generates framing patterns and CRC4 codes, formats outgoing channel and signaling data, and produces network alarm codes when enabled. The receive side decodes the incoming data and establishes frame, CAS multiframe, and CRC4 multiframe alignments. Once synchronized, the device extracts channel, signaling, and alarm data.

A serial port allows access to 14 on-chip control and status registers in the processor mode. In this mode, a host processor controls features such as error logging, per-channel code manipulation, and alteration of the receive synchronizer algorithm.

The hardware mode is intended for preliminary system prototyping and/or retrofitting into existing systems. This mode requires no host processor and disables special features available in the processor mode.

Data Sheet

Download	Rev 1	(PDF, 392kB)
E-Mail

Key Features

Single-chip primary-rate transceiver meets CCITT standards G.704, G.706 and G.732
Supports new CRC4-based framing standards and CAS and CCS signaling standards
Simple serial interface used for device configuration and control in processor mode
Hardware mode requires no host processor; intended for standalone applications
Comprehensive on-chip alarm generation, alarm detection, and error logging logic
Shares footprint with DS2180A T1 transceiver
Comparison to DS2175 T1/CEPT elastic store, DS2186 transmit line interface, DS2187 receive line interface, and DS2188 jitter attenuator
5V supply; low-power CMOS technology

Diagram

Block Diagram

Reliability Reports

Reliability Report:

DS2181A.pdf

Software/Models

none

Ordering Information

Filters:

Part Number:

Package:

Temperature:

Tape and Reel

Sample

Part Number	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
DS2181A			Active	PDIP(W);40 pin;836.5 mm² Outline Drawing:21-0044 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P40-2*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS2181A+			Active	PDIP(W);40 pin;836.5 mm² Outline Drawing:21-0044 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P40+2*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS2181AN			Active	PDIP(W);40 pin;835.7 mm² Outline Drawing:21-0044 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P40-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
DS2181AQ			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44-7*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS2181AQ+			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44+7*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS2181AQ+T&R			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44+7*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS2181AQ/T&R			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44-7*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS2181AQN			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44-7*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
DS2181AQN+			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44+7*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS2181AQN+T&R			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44+7*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
Part Number	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
DS2181AQN/T&R			Active	PLCC;44 pin;311.5 mm² Outline Drawing:21-0049 (PDF) Land Pattern: 90-0236 (PDF) Use pkgcode/variation: Q44-7*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis

Notes:

Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers
Parametric Search
Applications Help

Information Index

Rev 1; 1999-11-20
This page last modified: 2009-10-22