Maxim > Products > Memory > DS1330AB, DS1330Y

DS1330AB, DS1330Y

256k Nonvolatile SRAM with Battery Monitor

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Part Number Status
DS1330AB Active: In Production. See Ordering Information for details.
DS1330Y Active: In Production. See Ordering Information for details.

Description

The DS1330 256k Nonvolatile (NV) SRAMs are 262,144-bit, fully static, NV SRAMs organized as 32,768 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. Additionally, the DS1330 devices have dedicated circuitry for monitoring the status of VCC and the status of the internal lithium battery. DS1330 devices in the PowerCap module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete NV SRAM module. The devices can be used in place of 32k x 8 SRAM, EEPROM, or Flash components.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 3 (PDF, 216kB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
This product contains lithium-metal batteries. See applicable regulations for transport requirements for batteries in equipment.

Key Features

  • 10 years minimum data retention in the absence of external power
  • Data is automatically protected during power loss
  • Power supply monitor resets processor when VCC power loss occurs and holds processor in reset during VCC ramp-up
  • Battery monitor checks remaining capacity daily
  • Read and write access times of 100ns
  • Unlimited write cycle endurance
  • Typical standby current 50µA
  • Upgrade for 32k x 8 SRAM, EEPROM or Flash
  • Lithium battery is electrically disconnected to retain freshness until power is applied for the first time
  • Full ±10% VCC operating range (DS1330Y) or optional ±5% VCC operating range (DS1330AB)
  • Optional industrial temperature range of -40°C to +85°C, designated IND
  • PowerCap Module (PCM) package
    • Directly surface-mountable module
    • Replaceable snap-on PowerCap provides lithium backup battery
    • Standardized pinout for all NV SRAM
    • Detachment feature on PowerCap allows easy removal using a regular screwdriver
  • Underwriters Laboratories (UL) Recognized
   
   

Key Specifications:

Memory (EPROM, EEPROM, ROM, NV SRAM)
Part Number Memory Type Memory Size Bus Type Real Time Clock DIP w/Int. Batt. Pwr. Cap Pckg. Battery Monitor GPIO VSUPPLY
(V)
VSUPPLY
(V)
Budgetary Price
min max See Notes
DS1330AB  NV SRAM 32K x 8 Parallel No No Yes Yes No 4.75 5.25 $8.66 @1k
DS1330Y  4.5 5.5 $8.66 @1k
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

DS1330AB, DS1330Y: Pin Assignment
Pin Assignment

More Information

UL Certified

Didn't Find What You Need?

Information Index

Document Ref.: 19-5593 Rev 3; 2010-10-21
This page last modified: 2010-10-21




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products