Maxim > Products > Memory > DS1250AB, DS1250Y

DS1250AB, DS1250Y

4096k Nonvolatile SRAM

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Part Number Status
DS1250AB Active: In Production. See Ordering Information for details.
DS1250Y Active: In Production. See Ordering Information for details.

Description

The DS1250 4096k Nonvolatile SRAMs are 4,194,304-bit, fully static, nonvolatile SRAMs organized as 524,288 words by 8 bits. Each complete NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. DIP-package DS1250 devices can be used in place of existing 512k x 8 static RAMs directly conforming to the popular byte-wide 32-pin DIP standard. DS1250 devices in the PowerCap Module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete Nonvolatile SRAM module. There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 4 (PDF, 244kB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
This product contains lithium-metal batteries. See applicable regulations for transport requirements for batteries in equipment.

Key Features

  • 10 years minimum data retention in the absence of external power
  • Data is automatically protected during power loss
  • Replaces 512k x 8 volatile static RAM, EEPROM or Flash memory
  • Unlimited write cycles
  • Low-power CMOS
  • Read and write access times of 70ns
  • Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time
  • Full ±10% VCC operating range (DS1250Y)
  • Optional ±5% VCC operating range (DS1250AB)
  • Optional industrial temperature range of -40°C to +85°C, designated IND
  • JEDEC standard 32-pin DIP package
  • PowerCap Module (PCM) package
    • Directly surface-mountable module
    • Replaceable snap-on PowerCap provides lithium backup battery
    • Standardized pinout for all nonvolatile SRAM products
    • Detachment feature on PCM allows easy removal using a regular screwdriver
  • Underwriters Laboratories (UL) Recognized
   
   

Key Specifications:

Memory (EPROM, EEPROM, ROM, NV SRAM)
Part Number Memory Type Memory Size Bus Type Real Time Clock DIP w/Int. Batt. Pwr. Cap Pckg. Battery Monitor GPIO VSUPPLY
(V)
VSUPPLY
(V)
Budgetary Price
min max See Notes
DS1250AB  NV SRAM 512K x 8 Parallel No Yes Yes No No 4.75 5.25 $47.03 @1k
DS1250Y  4.5 5.5 $47.03 @1k
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

DS1250AB, DS1250Y: Pin Assignment
Pin Assignment

Didn't Find What You Need?

Information Index

Document Ref.: 19-5647 Rev 4; 2010-12-06
This page last modified: 2010-12-06




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products