3-in-1 High-Speed Silicon Delay Line

Part Number	Status	Replacement	Explanation
DS1035	This product is No Longer Available. See Ordering Information for recommended replacements.	DS1135	The DS1035 is no longer recommended for new designs.

The DS1035 3-in-1 High-Speed Silicon Delay Line has three independent, buffered taps that reproduce logic inputs after delays ranging from 6ns to 30ns at each output. Nominal tolerance is ±1.5ns with additional tolerance of ±2.0ns over temperature and voltage for faster delays (see table). Both leading- and trailing-edge accuracy are specified. Each output can drive up to ten 74LS loads

The DS1035 is similar to the DS1033 but works with 5-volt systems. As a delay line, the DS1035 provides an effective, economical solution to the designer working with the complex timing requirements of mismatched ASICs or other components, or with the strict timing tolerances of increasing system clock rates. Besides fine-tuning system timing, the DS1035 can also function as a pulse width modulator or free-running oscillator. Innovative circuit designs and factory laser or EPROM trimming enhance accuracy without the need for external components, saving cost and space.

Download Rev 1 (PDF, 51kB) E-Mail

My Maxim: Not Logged In By logging in to My Maxim you can subscribe to alerts for this data sheet. Login | Register