Evaluation Kit for the MAX5003-50W

All versions are Not Recommended for New Designs. See Ordering Information for recommended replacements.

The MAX5003 50W forward converter evaluation kit (EV kit) provides a regulated +5V output voltage at currents up to 10A, when operated from a +36V to +72V input voltage range.

This EV kit is fully assembled and tested. The output voltage is preset to +5V. A single-transistor forward-converter topology with a reset winding is used for high output power and high efficiency. The use of an optocoupler in the feedback circuit provides full 1500V primary to secondary galvanic isolation. A bottom-mounted heatsink plate safely dissipates the heat generated by the power MOSFET and the output diode. The power supply is designed to fit into a small footprint.

WARNING: Dangerous voltages are present on this EV kit and on equipment connected to it. Users who power-up this EV kit or power the sources connected to it must be careful to follow safety procedures appropriate to working with high-voltage electrical equipment.

Under severe fault or failure conditions, this EV kit may dissipate large amounts of power, which could result in the mechanical ejection of a component or of component debris at high velocity. Operate this EV kit with care to avoid possible personal injury.

Download Rev 0 (PDF, 624kB) E-Mail