Maxim > Products > Sensors > MAX6654
Maxim > Products > Thermal Management > MAX6654

MAX6654

1°C Accurate Remote/Local Temperature Sensor with SMBus Serial Interface

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX6654 is a precise digital thermometer that reports the temperature of both a remote P-N junction and its own die. The remote junction can be a diode-connected transistor—typically a low-cost, easily mounted 2N3904 NPN type or 2N3906 PNP type—that replaces conventional thermistors or thermocouples. Remote accuracy is ±1°C for multiple transistor manufacturers, with no calibration needed. The remote junction can also be a common-collector PNP, such as a substrate PNP of a microprocessor (µP).

The 2-wire serial interface accepts standard System Management Bus (SMBus™), Write Byte, Read Byte, Send Byte, and Receive Byte commands to program the alarm thresholds and to read temperature data. Measurements can be done automatically and autonomously, with the conversion rate programmed by the user, or programmed to operate in a single-shot mode. The adjustable conversion rate allows the user to optimize supply current and temperature update rate to match system needs. When the conversion rate is faster than 1Hz, the conversion results are available as a 7-bit-plus-sign byte with a 1°C LSB. When the conversion rate is 1Hz or slower, the MAX6654 enters the extended mode. In this mode, 3 additional bits of temperature data are available in the extended resolution register, providing 10-bit-plus-sign resolution with a 0.125°C LSB. Singleshot conversions also have 0.125°C per LSB resolution when the conversion rate is 1Hz or slower.

A parasitic resistance cancellation (PRC) mode can also be invoked for conversion rates of 1Hz or slower by setting bit 4 of the configuration register to 1. In PRC mode, the effect of series resistance on the leads of the external diode is canceled. The 11-bit conversion in PRC mode is performed in <500ms and is disabled for conversion rates faster than 1Hz. The one-shot conversion is also 11 bits in < 500ms.

The MAX6654 default low-temperature measurement limit is 0°C. This can be extended to -64°C by setting bit 5 of the configuration register to 1.

The MAX6654 is available in a small, 16-pin QSOP surface-mount package.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 3 (PDF, 436kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX6654EVSYS

Key Features

  • High Accuracy ±1°C (max) from +70°C to +100°C (Remote)
  • 11-Bit, 0.125°C Resolution
  • Dual Channel: Measures Remote and Local Temperature
  • No Calibration Required
  • Programmable Under/Overtemperature Alarms
  • I²C-Compatible/SMBus Interface
  • +3V to +5.5V Supply Range
 

Applications/Uses

  • Computers: Desktop, Workstation, Server
  • Multichip Modules
  • Notebook Computers
  • Servers
  • Test and Measurement Equipment
  • Thin Clients
  • Workstations
   

Key Specifications:

Temperature Sensors
Part Number Sensor Type Alarm Output Functions Interface Remote Chan. Accuracy
(±°C)
Parasite Pwr. Temp. Resolution
(bits)
Oper. Temp.
(°C)
Smallest Available Pckg.
(mm2)
Budgetary Price
max w/pins See Notes
MAX6654  Remote Alert Remote & Local Sensor 2-Wire/I2C/SMBus Single 1 No 11 -55 to +125 30.9 $2.30 @1k
See All Temperature Sensors (103)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX6654: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Application Note 685   How to Simplify the Interface between Microcontroller and Temperature Sensor
Application Note 1057   Compensating for Ideality Factor and Series Resistance Differences between Thermal-Sense Diodes
Application Note 3641   Migrating to the MAX6642 from Other Thermal Diode Temperature Sensors
Tutorial 4679   Thermal Management Handbook

Product Guides

Thermal Management (PDF)

Reliability Reports

Reliability Report: MAX6654.pdf
Show FIT data for:

Software/Models

MAX6654 IBIS Model

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX6654EVKIT    
Active KIT;

Land Pattern: Not Available

See data sheet
MAX6654MEE    
Active QSOP;16 pin;30.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0167 (PDF)
Use pkgcode/variation: E16-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX6654MEE+  
Active QSOP;16 pin;30.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0167 (PDF)
Use pkgcode/variation: E16+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX6654MEE+T    
Active QSOP;16 pin;30.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0167 (PDF)
Use pkgcode/variation: E16+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX6654MEE-T    
Active QSOP;16 pin;30.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0167 (PDF)
Use pkgcode/variation: E16-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX6654YMEE+    
Active QSOP;16 pin;30.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0167 (PDF)
Use pkgcode/variation: E16+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX6654YMEE+T    
Active QSOP;16 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX1617 Remote/Local Temperature Sensor with SMBus Serial Interface
MAX1617A Remote/Local Temperature Sensor with SMBus Serial Interface
See All Temperature Sensors (109 Products)

Similar Products by Application

Computers: Desktops and Workstations > Thermal Management

Evaluation Kits

MAX6654EVSYS Evaluation System for the MAX6654

Products with Similar Part Numbers

MAX6654EVSYS Evaluation System for the MAX6654

More Information

New Product Press Release 2000-12-28 ]
Temperature Family by Product Type


Didn't Find What You Need?

Information Index

Document Ref.: 19-1836 Rev 3; 2006-05-11
This page last modified: 2010-05-11


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products