|
|
|
MAX3097E, MAX3098E
±15kV ESD-Protected, 32Mbps, 3V/5V,Triple RS-422/RS-485 Receivers with Fault Detection
|
Status
Active: In Production.
Description
The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers' inputs have fault thresholds that detect when the part is not in a valid state.
The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode range. They also generate a fault indication when the differential input voltage goes below a preset threshold. See Ordering Information or the Electrical Characteristics in the full data sheet for threshold values.
The fault circuitry includes a capacitor-programmable delay to ensure that there are no erroneous fault conditions even at slow edge rates. Each receiver is capable of accepting data at rates up to 32Mbps.
|
|
Data Sheet
|
Key Features
- Detects the Following RS-485 Faults:
- Open-Circuit Condition
- Short-Circuit Condition
- Low Differential Voltage Signal
- Common-Mode Range Violation
- ESD Protection
- ±15kVHuman Body Model
- ±15kVIEC 1000-4-2, Air-Gap Discharge Method
- ±8kVIEC 1000-4-2, Contact Discharge Method
- Single +3V to +5.5V Operation
- -10V to +13.2V Extended Common-Mode Range
- Capacitor-Programmable Delay of Fault Indication Allows Error-Free Operation at Slow Data Rates
- Independent and Universal Fault Outputs
- 32Mbps Data Rate
- 16-Pin QSOP is 40% Smaller than Industry-Standard 26LS31/32 Solutions
|
|
Applications/Uses
- Embedded Systems
- High-Speed, Triple RS-485/RS-422 Receiver with Extended Electrostatic Discharge (ESD)
- RS-485/RS-422 Receivers for Motor-Shaft Encoders
- Telecommunications
- Triple RS-485/RS-422 Receiver with Input Fault Indication
|
|
|
|
Key Specifications:
| RS-422/485 Line Driver/Receivers |
| Part Number |
Tx/Rx |
VSUPPLY (V) |
ICC (mA) |
Data Rate (kbps) |
Tx EN |
Rx EN |
Rx/Tx on Bus |
Package/Pins |
Budgetary Price |
| typ |
min |
See Notes |
| MAX3097E |
3Rx |
|
3.1 |
32000 |
No |
No |
240 |
|
$3.87 @1k |
| MAX3098E |
|
$3.87 @1k |
|
See All RS-422/485 Line Driver/Receivers (165)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Application Circuit
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-1727
Rev 0;
2000-08-10
This page last modified: 2009-09-30
|
|
|