MAX1737

Stand-Alone Switch-Mode Lithium-Ion Battery-Charger Controller

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (2)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX1737 is a switch-mode lithium-ion (Li+) battery charger that charges one to four cells. It provides a regulated charging current and a regulated voltage with only a ±0.8% total voltage error at the battery terminals. The external N-channel switch and synchronous rectifier provide high efficiency over a wide input voltage range. A built-in safety timer automatically terminates charging once the adjustable time limit has been reached.

The MAX1737 regulates the voltage set point and charging current using two loops that work together to transition smoothly between voltage and current regulation. An additional control loop monitors the total current drawn from the input source to prevent overload of the input supply, allowing the use of a low-cost wall adapter.

The per-cell battery voltage regulation limit is set between +4.0V and +4.4V and can be set from one to four by pin strapping. Battery temperature is monitored by an external thermistor to prevent charging if the battery temperature is outside the acceptable range.

The MAX1737 is available in a space-saving 28-pin QSOP package. Use the evaluation kit (MAX1737EVKIT) to help reduce design time.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 4 (PDF, 188kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX1737EVKIT

Key Features

  • Stand-Alone Charger for Up to Four Li+ Cells
  • ±0.8% Accurate Battery Regulation Voltage
  • Low Dropout: 98% Duty Cycle
  • Safely Precharges Near-Dead Cells
  • Continuous Voltage and Temperature Monitoring
  • < 1µA Shutdown Battery Current
  • Input Voltage Up to +28V
  • Safety Timer Prevents Overcharging
  • Input Current Limiting
  • Space-Saving 28-Pin QSOP
  • 300kHz PWM Oscillator Reduces Noise
  • 90% Conversion Efficiency
 

Applications/Uses

  • Desktop Cradle Chargers
  • Handheld Instruments (PDAs, Palmtops)
  • Li+ Battery Packs
  • Notebook Computers
   

Key Specifications:

Battery Chargers
Part Number Cell Chemistry Lithium Ion Cells Protected VIN
(V)
Charging VIN
(V)
Charge Rate Set by Max. ICHG
(A)
Charge Termination Charge Regulation EV Kit Oper. Temp.
(°C)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
max max max w/pins See Notes
MAX1737 
Li-Ion
Li-Polymer
1
2
3
4
28 28 Resistor 4 Timer Switchmode Yes -40 to +85
QSOP/28
61.9 $2.86 @1k
See All Battery Chargers (68)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX1737: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Tutorial 913   Switch-Mode, Linear, and Pulse Charging Techniques for Li+ Battery in Mobile Phones and PDAs
Application Note 1817   Reduce Component Count and Cut Costs by Disabling the MAX1737 Source-Current Loop
Application Note 3841   Improving Accuracy of the MAX1737 Lithium-Ion Battery Charger
Application Note 4169   Understanding Li+ Battery Operation Lessens Charging Safety Concerns
Application Note 4520   Charging Lithium Batteries with a Nonstandard Termination Voltage

Reliability Reports

Reliability Report: MAX1737.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX1737EEI    
Active QSOP;28 pin;61.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0173 (PDF)
Use pkgcode/variation: E28-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX1737EEI+  
Active QSOP;28 pin;61.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0173 (PDF)
Use pkgcode/variation: E28+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1737EEI+T    
Active QSOP;28 pin;61.9 mm²
Outline Drawing:21-0055 (PDF)
Land Pattern: 90-0173 (PDF)
Use pkgcode/variation: E28+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1737EEI-T    
Active QSOP;28 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX745 Switch-Mode Lithium-Ion Battery-Charger
See All Battery Chargers (75 Products)

Similar Products by Application

Ultrasound Imaging Systems > Battery Charger

Evaluation Kits

MAX1737EVKIT Evaluation Kit for the MAX1737

Products with Similar Part Numbers

MAX1737EVKIT Evaluation Kit for the MAX1737


Didn't Find What You Need?

Information Index

Document Ref.: 19-1793 Rev 4; 2007-09-14
This page last modified: 2009-09-25


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products