MAX3665

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential output swing over a wide range of input current levels, thus reducing pulse-width distortion. The differential outputs are back-terminated with 50Ω per side.

The overall transimpedance gain is nominally 8kΩ. For input signal levels beyond approximately 50µAp-p, the amplifier will limit the output swing to 250mV. The MAX3665's low 55nA input noise provides a typical sensitivity of -33.2dBm in 1300nm, 622Mbps receivers.

The MAX3665 is designed to be used in conjunction with the MAX3676 clock recovery and data retiming IC with limiting amplifier. Together they form a complete 3.3V or 5.0V 622Mbps SDH/SONET receiver.

In die form, the MAX3665 is designed to fit on a header with a PIN diode. It includes a filter connection that provides positive bias for the photodiode through a 1.5kΩ resistor to VCC. The device is available in an 8-pin µMAX® package.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 732kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX3665EVKIT

Key Features

  • +3.3V or +5.0V Single-Supply Operation
  • 55nARMS Input-Referred Noise
  • 70mW Power Consumption at VCC = 3.3V
  • 8kΩ Gain
  • 450µA Peak Input Current
  • 260ps (max) Deterministic Jitter
  • Differential Output Drives 100ΩLoad
  • 470MHz Bandwidth
 

Applications/Uses

  • PIN Photodiode Preamplifiers and Receivers
  • Regenerators for SDH/SONET
  • SDH/SONET Receivers
   

Key Specifications:

Transimpedance Amplifiers (TIA)
Part Number Target Oper. Range
(Gbps)
Data Rate
(Mbps)
VSUPPLY
(V)
ICC
(mA)
Input Noise
(nA)
BW
(MHz)
ZT
(kΩ)
EV Kit Package/Pins
max typ max min
MAX3665  <1 622
3.3
5
25 62 470 7 Yes
µMAX/8
See All Transimpedance Amplifiers (TIA) (11)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX3665: Typical Application Circuit
Typical Application Circuit

Application Notes

Application Note 1102   HFAN-09.0.3: APON Class A, B, & C Physical Layer Requirements
Application Note 1788   HFAN-06.2: IBIS Data for CML, PECL, and LVDS Interface Circuits

Reliability Reports

Reliability Report: MAX3665.pdf
Show FIT data for:

Software/Models

MAX3665EUA SPICE Input/Output Model

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3665E/D    
Active DICE SALES;NA pin;DICE;

Land Pattern: Not Applicable
Use pkgcode/variation: DICE*
See data sheet
MAX3665EUA    
Active µMAX;8 pin;16.2 mm²
Outline Drawing:21-0036 (PDF)
Land Pattern: 90-0092 (PDF)
Use pkgcode/variation: U8-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX3665EUA+    
Active µMAX;8 pin;16.2 mm²
Outline Drawing:21-0036 (PDF)
Land Pattern: 90-0092 (PDF)
Use pkgcode/variation: U8+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3665EUA+T    
Active µMAX;8 pin;16.2 mm²
Outline Drawing:21-0036 (PDF)
Land Pattern: 90-0092 (PDF)
Use pkgcode/variation: U8+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3665EUA-T    
Active uMAX;8 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX3681 +3.3V, 622Mbps, SDH/SONET 1:4 Deserializer with LVDS Outputs
MAX3680, MAX3680A +3.3V, 622Mbps, SDH/SONET 1:8 Deserializer with TTL Outputs
MAX3676 622Mbps, 3.3V Clock-Recovery and Data-Retiming IC with Limiting Amplifier
See All Transimpedance Amplifiers (TIA) (13 Products)

Similar Products by Application

Telecom Switches (PBX and Central Office) > TIA
Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > TIA

Evaluation Kits

MAX3665EVKIT Evaluation Kit for the MAX3665

Products with Similar Part Numbers

MAX3665EVKIT Evaluation Kit for the MAX3665

More Information

New Product Press Release 2000-01-21 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-1601 Rev 2; 2005-12-13
This page last modified: 2007-06-05


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products