|
|
|
MAX4074, MAX4075, MAX4076, MAX4077, MAX4078
Micropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op Amps
Fixed-Gain Amplifiers Increase Accuracy and Save Space
|
Status
| Part Number |
Status |
|
MAX4074
|
Active: In Production. See Ordering Information for details. |
|
MAX4075
|
This product is No Longer Available. |
|
MAX4076
|
Active: In Production. |
|
MAX4077
|
Active: In Production. |
|
MAX4078
|
Active: In Production. |
Description
The MAX4074–MAX4078 GainAmp™ op amp family combines low-cost rail-to-rail op amps with precision internal gain-setting resistors. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume just 34µA. GainAmp amplifiers are optimally compensated for each gain version, achieving gain bandwidth (GBW) products up to 4MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands ±17V at either input without damage or excessive current draw (MAX4074/MAX4075 only).
Two versions are available in this amplifier family. The MAX4076/MAX4077/MAX4078 are single/dual/quad open-loop, unity-gain-stable op amps, and the MAX4074/MAX4075 are single/dual fixed-gain op amps. The input common-mode voltage range of the open-loop amplifiers extends from 150mV below the negative supply to within 1.2V of the positive supply. The outputs can swing rail-to-rail and drive a 1kΩ load while maintaining excellent DC accuracy (MAX4074/MAX4075 only). The amplifiers are stable for capacitive loads up to 100pF.
For space-critical operations, the MAX4074/MAX4076 are available in space-saving SOT23-5 packages.
|
|
Data Sheet
|
Key Features
- Internal Gain-Setting Resistors in SOT23 Packages (MAX4074/MAX4076)
- 0.1% Gain Accuracy (RF/RG) (MAX4074/MAX4075)
- 54 Standard Gains Available (MAX4074/MAX4075)
- Open-Loop, Unity-Gain-Stable Op Amps (MAX4076/MAX4077/MAX4078)
- Rail-to-Rail Outputs Drive 1kΩ Load
- +2.5V to +5.5V Single Supply
- 34µA Supply Current
- Up to 4MHz GBW Product
- Fault-Protected Inputs Withstand ±17V
- 200pA (max) Input Bias Current
- Stable with Capacitive Loads up to 100pF with No Isolation Resistor
|
|
Applications/Uses
- Cellular Handsets
- Cordless Phones
- Digital Cameras (DIGICAMs)
- Glucose Meters
- GPS Solutions
- Infrared Receivers for Remote Controls
- Instruments, Terminals, and Bar-Code Readers
- IP Camera
- Keyless Entry
- Low-Side Current-Sense Amplifiers
- MP3 and Portable Media Players
- Photodiode Preamps
- Portable Battery-Powered Equipment
- Smart-Card Readers
|
|
|
|
Key Specifications:
| Instrumentation/Difference Amplifiers |
| Part Number |
Architecture |
Amps. |
VCMVR |
Rail to Rail |
AV
(V/V) |
VSUPPLY (Total)
(V) |
VSUPPLY (Total)
(V) |
ICC per Amp.
(mA) |
ICC per Amp.
(mA) |
VOS
(µV) |
PSRR @DC
(dB) |
Input IBIAS
(nA) |
Unity Gain BW
(MHz) |
Slew Rate
(V/µs) |
VCMVR
(V) |
en
(nV/√Hz) |
in
(pA/√Hz) |
Noise Spec'd @ |
Low Pwr. Shutdn |
Oper. Temp.
(°C) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| to Neg. Rail |
min |
max |
typ |
max |
max |
typ |
max |
typ |
typ |
max w/pins |
| MAX4074 |
Inverting Amp. |
1 |
Yes |
Output Only |
1.25 to 101 |
2.5 |
5.5 |
0.034 |
0.055 |
3500 |
96 |
1 |
0.2 |
0.1 |
VEE-0.15 to VCC-1.2 |
150 |
0.5 |
5kHz |
No |
-40 to +85 |
|
9 |
|
See All Instrumentation/Difference Amplifiers (15)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
| Operational Amplifiers |
| Part Number |
Amps. |
Rail to Rail |
AVCL |
VSUPPLY (Total)
(V) |
VSUPPLY (Total)
(V) |
ICC per Amp.
(µA) |
ICC per Amp.
(µA) |
VOS
(µV) |
CMRR @DC
(dB) |
PSRR @DC
(dB) |
Input IBIAS
(nA) |
Unity Gain BW
(MHz) |
Slew Rate
(V/µs) |
en
(nV/√Hz) |
in
(pA/√Hz) |
Low Pwr. Shutdn |
Package/Pins |
Budgetary Price |
| min |
min |
max |
typ |
max |
max |
typ |
typ |
max |
typ |
typ |
See Notes |
| MAX4076 |
1 |
Output Only |
1 |
2.5 |
5.5 |
45 |
60 |
3500 |
95 |
95 |
0.2 |
0.23 |
0.09 |
110 |
0.0011 |
No |
|
$0.75 @1k |
| MAX4077 |
2 |
|
$1.20 @1k |
| MAX4078 |
4 |
|
$1.83 @1k |
|
See All Operational Amplifiers (160)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
 Typical Operating Circuit
Notes and Comments
Micropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop op amps
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-1526
Rev 1;
1999-10-01
This page last modified: 2010-05-06
|
|
|
Download
E-Mail