|
MAX1200
+5V Single-Supply, 1Msps, 16-Bit Self-Calibrating ADC
Lowest-Latency (4 Clock Cycles) 16-Bit 1Msps ADC Has Excellent Dynamic Performance
|
Status
All versions are No Longer Available.
Description
The MAX1200 16-bit, monolithic, analog-to-digital converter (ADC) is capable of conversion rates up to 1Msps. This CMOS integrated circuit uses a fully differential, pipelined architecture with digital error correction and a short self-calibration to ensure 16-bit linearity at full sample rates. An on-chip track/hold (T/H) maintains superb dynamic performance up to the Nyquist frequency. The MAX1200 operates from a single +5V supply.
The fully differential inputs allow an input swing of ±VREF. The reference is also differential with the positive reference (RFPF) typically connected to +4.096V and the negative reference (RFNF) connected to analog ground. Additional sensing pins (RFPS, RFNS) are provided to compensate for any resistive divider action that may occur. A single-ended input is also possible using two operational amplifiers.
Power dissipation is typically only 273mW at +5V, at a sampling rate of 1Msps. The device employs a CMOS-compatible, 16-bit parallel, two's complement output data format. For a higher sampling speed (up to 2.2Msps) but lower resolution (14-bit), select the MAX1201, a pin-compatible version of the MAX1200.
The MAX1200 is available in an MQFP package and operates over the commercial (0°C to +70°C) and extended-industrial (-40°C to +85°C) temperature ranges.
|
|
Data Sheet
|
An evaluation kit is available: MAX1200EVKIT, MAX1201EVKIT, MAX1205EVKIT
Key Features
- Monolithic 16-Bit, 1Msps A/D Converter
- Single +5V Supply
- ±VREF Differential Input Voltage Range
- 87dB SNR for fIN = 100kHz
- 91dB SFDR for fIN = 100kHz
- 273mW Low-Power Dissipation
- ±0.5LSB Differential Nonlinearity Error
- Three-State, Two's Complement Output Data
- On-Demand Self-Calibration
- Pin-Compatible 14-Bit Versions Available (1Msps MAX1205, 2.2Msps MAX1201)
|
|
Applications/Uses
- Communication Systems
- Data Acquisition
- High-Resolution Imaging
- Instrumentation
- Scanners
|
|
|
|
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX1200ACMH
|
|
N/A |
No Longer Available |
MQFP;44 pin;181.2 mm²
Outline Drawing:21-0826 (PDF)
Land Pattern: 90-0169 (PDF)
Use pkgcode/variation: M44-2*
|
0°C to +70°C
|
See data sheet
|
| MAX1200ACMH-T
|
|
N/A |
No Longer Available |
MQFP;44 pin
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
Single-supply, 16-bit self-calibrating ADC
Similar Products by Function
| MAX1201 |
+5V, Single-Supply, 2.2Msps, 14-Bit Self-Calibrating ADC |
| MAX1205 |
+5V Single-Supply, 1Msps, 14-Bit Self-Calibrating ADC |
Evaluation Kits
Products with Similar Part Numbers
Didn't Find What You Need?
Information Index
Document Ref.: 19-1413
Rev 0;
1998-12-01
This page last modified: 2009-09-07
|
Download
E-Mail