|
|
|
MAX1647, MAX1648
Chemistry-Independent Battery Chargers
SBS Level 2 Smart Battery Charger with SMBus Interface
|
Status
| Part Number |
Status |
|
MAX1647
|
Active: In Production. |
|
MAX1648
|
This product is No Longer Available. See Ordering Information for recommended replacements. |
Description
The MAX1647/MAX1648 provide the power control necessary to charge batteries of any chemistry. In the MAX1647, all charging functions are controlled through the Intel® System Management Bus (SMBus™) interface. The SMBus 2-wire serial interface sets the charge voltage and current, and provides thermal status information. The MAX1647 functions as a level 2 charger, compliant with
the Duracell®/Intel Smart Battery Charger Specification. The MAX1648 omits the SMBus serial interface, and instead sets the charge voltage and current proportional to the voltage applied to external control pins.
In addition to the feature set required for a level 2 charger, the MAX1647 generates interrupts to signal the host when power is applied to the charger or a battery is installed or removed. Additional status bits allow the host to check whether the charger has enough input voltage, and whether the voltage on or current into the battery is being regulated. This allows the host to determine when lithium-ion batteries have completed charge without interrogating
the battery.
The MAX1647 is available in a 20-pin SSOP with a 2mm profile height. The MAX1648 is available in a 16-pin SO package.
|
|
Data Sheet
|
Key Features
- Charges Any Battery Chemistry: Li-Ion, NiCd, NiMH, Lead Acid, etc.
- Intel SMBus 2-Wire Serial Interface (MAX1647)
- Intel/Duracell Level 2 Smart Battery Compliant (MAX1647)
- 4A, 2A, or 1A Maximum Battery-Charge Current
- 11-Bit Control of Charge Current
- Up to 18V Battery Voltage
- 10-Bit Control of Voltage
- ±0.75% Voltage Accuracy with External ±0.1% Reference
- Up to 28V Input Voltage
- Battery Thermistor Fail-Safe Protection
|
|
Applications/Uses
- Charger Base Stations
- Notebook Computers
- PDAs and Other Handheld Devices
- Phones
|
|
|
|
Key Specifications:
| Battery Chargers |
| Part Number |
Cell Chemistry |
NiMH/ NiCd Cells |
Lithium Ion Cells |
Protected VIN
(V) |
Charging VIN
(V) |
Charge Rate Set by |
Max. ICHG
(A) |
Charge Termination |
Charge Regulation |
Oper. Temp.
(°C) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| max |
max |
≥ |
max w/pins |
| MAX1647 |
| Li-Ion | | Li-Polymer | | NiCd | | NiMH | | Universal |
|
|
|
28 |
28 |
SMBus |
4 |
| External Control | | Smart Battery Control |
|
Switchmode |
-40 to +85 |
|
57.9 |
|
See All Battery Chargers (68)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Pin Configurations
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Recommended Replacement |
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX1647EAP
|
|
|
Active |
|
SSOP;20 pin;57.9 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0094 (PDF)
Use pkgcode/variation: A20-2*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX1647EAP+
|
|
|
Active |
|
SSOP;20 pin;57.9 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0094 (PDF)
Use pkgcode/variation: A20+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1647EAP+T
|
|
|
Active |
|
SSOP;20 pin;57.9 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0094 (PDF)
Use pkgcode/variation: A20+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1647EAP-T
|
|
|
Active |
|
SSOP;20 pin
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
| MAX1648ESE
|
|
N/A |
No Longer Available |
MAX17435ETG+
|
SOIC(N);16 pin;61.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0097 (PDF)
Use pkgcode/variation: S16-5*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX1648ESE+
|
|
N/A |
No Longer Available |
MAX17435ETG+
|
SOIC(N);16 pin;61.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0097 (PDF)
Use pkgcode/variation: S16+5*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1648ESE+T
|
|
N/A |
No Longer Available |
MAX17435ETG+
|
SOIC(N);16 pin;61.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0097 (PDF)
Use pkgcode/variation: S16+5*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1648ESE-T
|
|
N/A |
No Longer Available |
MAX17435ETG+
|
N.SO;16 pin
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
MAX1647 Incorporates SMBus Interface
Similar Products by Function
| MAX1645, MAX1645A |
Advanced-Chemistry-Independent, Level-2 Battery Chargers with Input Current Limiting |
|
|
Didn't Find What You Need?
Information Index
Document Ref.: 19-1158
Rev 1;
2003-04-22
This page last modified: 2009-08-17
|
|
|
Download
E-Mail