Single/Dual/Triple/Quad Operational Amplifiers

Part Number	Status
ICL7611	Active: In Production. But some versions of the family are subject to Last Time Buy. See Ordering Information.
ICL7612	Active: In Production. But some versions of the family are subject to Last Time Buy. See Ordering Information.
ICL7614	This product is No Longer Available.
ICL7616	This product is No Longer Available.
ICL7621	Active: In Production. But some versions of the family are subject to Last Time Buy. See Ordering Information.
ICL7622	Active: In Production. But some versions of the family are subject to Last Time Buy. See Ordering Information.
ICL7624	Active: In Production.
ICL7631	Active: In Production.
ICL7632	Active: In Production.
ICL7634	Active: In Production.
ICL7641	Active: In Production.
ICL7642	Active: In Production.
ICL764X	Active: In Production.

The ICL761X–ICL764X family of monolithic CMOS op amps combine ultra-low input current with low-power operation over a wide supply voltage range. With pinselectable quiescent currents of 10µA, 100µA, or 1000µA per amplifier, these op amps will operate from ±1V to ±8V power supplies, or from single supplies from 2V to 16V. The CMOS outputs swing to within millivolts of the supply voltages.

The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA and an input impedance of 10¹²Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers.

Download Rev 3 (PDF, 516kB) E-Mail