|
|
|
MAX200, MAX201, MAX202, MAX203, MAX204, MAX205, MAX206, MAX207, MAX208, MAX209, MAX211, MAX213
+5V, RS-232 Transceivers with 0.1µF External Capacitors
|
Status
Active: In Production.
Description
The MAX200–MAX209/MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V needed for RS-232 output levels. The MAX201 and MAX209 operate from +5V and +12V, respectively, and contain a +12V to -12V charge-pump voltage converter.
The MAX200–MAX209/MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a 20kbps data rate. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.
The 5µW shutdown mode of the MAX200, MAX205, MAX206, and MAX211 conserves energy in battery-powered systems. The MAX213 has an active-low shutdown and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing the ring indicator (RI) to be monitored easily using only 75µW power.
The MAX211 and MAX213 are available in a 28-pin, wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now available in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components and are recommended for applications with limited circuit board space.
|
|
Data Sheet
|
Key Features
- For Low-Cost Applications:
MAX221E: ±15kV ESD-Protected, +5V, 1µA, Single RS-232 Transceiver with AutoShutdown™
- For Low-Voltage and Space-Constrained Applications:
MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA, +3.0V to +5.5V, Up to 1Mbps, True RS-232 Transceivers (MAX3246E Available in UCSP™ Package)
- For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V, RS-232 Transceivers in UCSP
- For Low-Voltage or Data Cable Applications:
MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins
- For Low-Power Applications:
MAX3224E-MAX3227E/MAX3244E/MAX3245E:
±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to +5.5V, RS-232 Transceivers with AutoShutdown Plus™
|
|
Applications/Uses
- Battery-Powered Equipment
- Computers
- Handheld Equipment
- Laptops, Palmtops, Notebooks
|
|
|
|
Diagram
MAX200: Pin Configuration/Typical Operating Circuit
Notes and Comments
5 drivers with shutdown (MAX200)
Standard +5V/+12V or battery supplies, same function as MAX232 (MAX201)
Industry standard (MAX202)
Available in SOIC (MAX203)
Replaces 1488 (MAX204) (MAX205) (MAX206) (MAX207)
Replaces 1488 and 1489 (MAX208)
Standard +5/+12V or battery supplies, single package solution for IBM PC serial port (MAX209)
Complete IBM PC serial port, industry standard (MAX211)
MAX241 with receivers active in shutdownd (MAX213)
Maximum reflow temperature is +225°C
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0065
Rev 7;
2009-11-23
This page last modified: 2010-06-01
|
|
|
Download
E-Mail