Maxim > Products > Amplifiers and Comparators > MXL1001

MXL1001

Precision Operational Amplifier

Overview

Technical Documents

Ordering Info

User Comments (0)

All

Status

Part Number	Status	Explanation
MXL1001	This product is No Longer Available. See Ordering Information for recommended replacements.	This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. For further information, contact us. The data sheet remains available for existing users. To the best of our knowledge, a second-source replacement for this part is available from Linear Technology.

Description

The MXL1001 offers significant specification improvement over earlier precision operational amplifiers and is pin-compatible with the industry-standard LT1001. Particular attention has been paid to the optimization of key parameters such as input offset voltage, common-mode rejection, and power-supply rejection. In addition, the high-performance MXL1001C commercial temperature device provides considerable cost savings when compared to equivalent grades of competing precision amplifiers.

The input offset voltage of all units is less than 60µV, allowing the premium military device, the MXL1001AM, to be specified at 15µV max. Power dissipation is close to half that of the industry-standard OP-07 precision op amp, without sacrificing noise or speed performance. A useful by-product of lower dissipation is decreased warm-up drift.

Data Sheet

Download	Rev 1	(PDF, 60kB)
E-Mail

Key Features

Guaranteed Low Offset Voltage
- MXL1001AM: 15µV max
- MXL1001C: 60µV max
Guaranteed Low Drift
- MXL1001AM: 0.6µV/°C max
- MXL1001C: 1.0µV/°C max
Guaranteed Low Bias Current
- MXL1001AM: 2nA max
- MXL1001C: 4nA max
Guaranteed CMRR
- MXL1001AM: 114dB min
- MXL1001C: 110dB min
Guaranteed PSRR
- MXL1001AM: 110dB min
- MXL1001C: 106dB min
Low Power Dissipation
- MXL1001AM: 75mW max
- MXL1001C: 80mW max
Low Noise: 0.3µV_p-p

Applications/Uses

High-Accuracy Data Acquisition
Low-Level Signal Processing
Strain-Gauge Amplifiers
Thermocouple Amplifiers

Diagram

Typical Operating Circuit

Reliability Reports

Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters:

Part Number:

Package:

Temperature:

Tape and Reel

Sample

Part Number	Free Sample	Buy	Status	Recommended Replacement	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MXL1001ACH		N/A	No Longer Available		TO99;8 pin;88.4 mm² Outline Drawing:21-0022 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: G99-8*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MXL1001ACJ8		N/A	No Longer Available		CDIP(N);8 pin;82.6 mm² Outline Drawing:21-0045 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: J8-2*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MXL1001ACN8		N/A	No Longer Available		PDIP;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001ACN8+		N/A	No Longer Available		PDIP;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001ACS8		N/A	No Longer Available		N.SO;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001ACS8+		N/A	No Longer Available		N.SO;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001AMH		N/A	No Longer Available		TO99;8 pin;88.4 mm² Outline Drawing:21-0022 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: G99-8*	-55°C to +125°C	RoHS/Lead-Free: No Materials Analysis
MXL1001AMJ8		N/A	No Longer Available		CDIP(N);8 pin;82.6 mm² Outline Drawing:21-0045 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: J8-2*	-55°C to +125°C	RoHS/Lead-Free: No Materials Analysis
MXL1001CH		N/A	No Longer Available		TO99;8 pin;88.4 mm² Outline Drawing:21-0022 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: G99-8*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MXL1001CJ8		N/A	No Longer Available	MXL1001MJ8	CDIP(N);8 pin;82.6 mm² Outline Drawing:21-0045 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: J8-2*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
Part Number	Free Sample	Buy	Status	Recommended Replacement	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MXL1001CN8		N/A	No Longer Available		PDIP;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001CN8+		N/A	No Longer Available		PDIP;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001CS8		N/A	No Longer Available		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-2*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MXL1001CS8+		N/A	No Longer Available		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+2*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MXL1001CS8+T		N/A	No Longer Available		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+2*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MXL1001CS8-T		N/A	No Longer Available		N.SO;8 pin Land Pattern: Not Available	0°C to +70°C	See data sheet
MXL1001MH		N/A	No Longer Available		TO99;8 pin;88.4 mm² Outline Drawing:21-0022 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: G99-8*	-55°C to +125°C	RoHS/Lead-Free: No Materials Analysis
MXL1001MJ8		N/A	No Longer Available		CDIP(N);8 pin;82.6 mm² Outline Drawing:21-0045 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: J8-2*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis

Notes:

Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Notes and Comments

Precision LT1001 second source

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers
Parametric Search
Applications Help

Information Index

Overview		Technical Documents		Ordering Info		Related Products
Description Key Features Applications/Uses Key Specifications Diagram Notes and Comments		Data Sheet Application Notes Evaluation Kits Product Guides Reliability Reports Software/Models		Price and Availability Samples Buy Online Package Information Lead-Free Information		Similar Products by Function Similar Products by Application Evaluation Kits Products with Similar Part Numbers Products Used With This

Document Ref.: 19-0286 Rev 1; 1994-08-01
This page last modified: 2007-01-12