MAX619

Regulated 5V Charge Pump DC-DC Converter

Compact, Inductorless, Low-Profile 5V Backup Supply Fits in 0.1 Sq. Inch

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX619 step-up charge-pump DC-DC converter delivers a regulated 5V ±4% output at 50mA over temperature. The input voltage range is 2V to 3.6V (two battery cells).

The complete MAX619 circuit fits into less than 0.1in² of board space because it requires only four external capacitors: two 0.22µF flying capacitors, and 10µF capacitors at the input and output.

Low operating supply current (150µA max) and low shutdown supply current (1µA max) make this device ideal for small, portable, and battery-powered applications. When shut down, the load is disconnected from the input.

The MAX619 is available in 8-pin DIP and SO packages.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 67kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX619EVKIT

Key Features

  • Regulated 5V ±4% Charge Pump
  • Output Current Guaranteed over Temperature
    • 20mA (VIN ≥ 2V)
    • 50mA (VIN, ≥ 3V)
  • 2V to 3.6V Input Range
  • No Inductors; Very Low EMI Noise
  • Ultra-Small Application Circuit (0.1in²)
  • Uses Small, Inexpensive Capacitors
  • 500kHz Internal Oscillator
  • Logic-Controlled 1µA Max Shutdown Supply Current
  • Shutdown Disconnects Load from Input
  • 8-Pin DIP and SO Packages
 

Applications/Uses

  • 5V Flash Memory Programmer
  • Battery-Powered Microprocessor-Based Systems
  • Compact 5V Op-Amp Supply
  • Local 3.3V to 5V Conversion
  • Minimum Component DC-DC Converters
  • Portable Instruments and Handy-Terminals
  • Regulated 5V Supply from Lithium Backup Battery
  • Remote Data-Acquisition Systems
  • Switching Drive Voltage for MOSFETs in Low-Voltage Systems
  • Two Battery Cells to 5V Conversion
   

Key Specifications:

Charge Pumps
Part Number Topology VIN
(V)
VIN
(V)
ICC
(mA)
Unadj. VOUT
(V)
IOUT
(A)
Oper. Freq.
(kHz)
Oper. Temp.
(°C)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
min max max typ max w/pins See Notes
MAX619 
Doubler
Regulated
2 3.6 0.17 5 0.05 500
-40 to +85
0 to +70
CDIP(N)/8
PDIP(N)/8
SOIC(N)/8
79.7 $1.60 @1k
See All Charge Pumps (45)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX619: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Tutorial 658   Choose the Right Ultra-Thin DC-DC Converter for a Compact PCMCIA Card
Tutorial 725   DC-DC Conversion Without Inductors
Application Note 3741   Analog ICs for Low Voltage Systems

Reliability Reports

Reliability Report: MAX619.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX619CPA    
Active PDIP(N);8 pin;79.7 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8-1*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
MAX619CPA+  
Active PDIP(N);8 pin;79.7 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8+1*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX619CSA    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-4*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
MAX619CSA+  
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX619CSA+T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX619CSA-T    
Active N.SO;8 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX619EPA    
Active PDIP(N);8 pin;79.7 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX619EPA+  
Active PDIP(N);8 pin;79.7 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX619ESA    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX619ESA+  
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX619ESA+T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX619ESA-T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX619MJA    
Active CDIP(N);8 pin;82.6 mm²
Outline Drawing:21-0045 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: J8-2*
-55°C to +125°C RoHS/Lead-Free: No
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Charge Pumps (52 Products)

Evaluation Kits

MAX619EVKIT Evaluation Kit for the MAX619

Products with Similar Part Numbers

MAX619EVKIT Evaluation Kit for the MAX619


Didn't Find What You Need?

Information Index

Document Ref.: 19-0227 Rev 2; 1996-05-01
This page last modified: 2008-03-26


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products