|
|
|
MAX1487, MAX481, MAX483, MAX485, MAX487, MAX488, MAX489, MAX490, MAX491
Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
|
Status
Active: In Production.
Description
The MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.
These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1µA. All parts operate from a single 5V supply.
Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
The MAX487 and MAX1487 feature quarter-unit-load receiver input impedance, allowing up to 128 MAX487/MAX1487 transceivers on the bus. Full-duplex communications are obtained using the MAX488–MAX491, while the MAX481, MAX483, MAX485, MAX487, and MAX1487 are designed for half-duplex applications.
|
|
Data Sheet
|
Key Features
- For Fault-Tolerant Applications
- MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4 Unit Load, +3.3V, RS-485 Transceiver
- MAX3440E–MAX3444E: ±15kV ESD-Protected, ±60V Fault-Protected, 10Mbps, Fail-Safe, RS-485/J1708 Transceivers
- For Space-Constrained Applications
- MAX3460–MAX3464: +5V, Fail-Safe, 20Mbps, PROFIBUS RS-485/RS-422 Transceivers
- MAX3362: +3.3V, High-Speed, RS-485/RS-422 Transceiver in a SOT23 Package
- MAX3280E–MAX3284E: ±15kV ESD-Protected, 52Mbps, +3V to +5.5V, SOT23, RS-485/RS-422, True Fail-Safe Receivers
- MAX3293/MAX3294/MAX3295: 20Mbps, +3.3V, SOT23, RS-485/RS-422 Transmitters
- For Multiple Transceiver Applications
- MAX3030E–MAX3033E: ±15kV ESD-Protected, +3.3V, Quad RS-422 Transmitters
- For Fail-Safe Applications
- MAX3080–MAX3089: Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers
- For Low-Voltage Applications
- MAX3483E/MAX3485E/MAX3486E/MAX3488E/MAX3490E/MAX3491E: +3.3V Powered, ±15kV ESD-Protected, 12Mbps, Slew-Rate-Limited, True RS-485/RS-422 Transceivers
|
|
Applications/Uses
- Industrial-Control Local Area Networks
- Level Translators
- Low-Power RS-422 Transceivers
- Low-Power RS-485 Transceivers
- Transceivers for EMI-Sensitive Applications
|
|
|
|
Diagram
Pin Configuration and Typical Operating Circuit
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX491ESD
|
|
|
Active |
SOIC(N);14 pin;54.2 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX491ESD+
|
|
|
Active |
SOIC(N);14 pin;54.2 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX491ESD+T
|
|
|
Active |
SOIC(N);14 pin;54.2 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX491ESD-T
|
|
|
Active |
SOIC(N);14 pin;54.2 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX491MJD
|
|
|
Active |
CDIP(N);14 pin;162.1 mm²
Outline Drawing:21-0045 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: J14-3*
|
-55°C to +125°C
|
RoHS/Lead-Free: No
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
MAX485 plus 1µA shutdown mode (MAX481)
Slew-rate limiting reduces EMI and reflections (MAX483)
Direct LTC485 replacement (MAX485)
MAX483 plus 1/4-unit load (MAX487)
Slew-rate limiting reduces EMI and reflections (MAX488)
MAX488 plus driver/receiver enable (MAX489)
Direct LTC490 replacement (MAX490)
Direct LTC491 replacement (MAX491)
Similar Products by Function
Similar Products by Application
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0122
Rev 9;
2009-10-20
This page last modified: 2010-02-11
|
|
|
Download
E-Mail