Maxim > Products > Automotive > MAX253
Maxim > Products > Interface, Interconnect, Signal Integrity > MAX253
Maxim > Products > Protection and Isolation > MAX253

MAX253

1W Primary-Side Transformer H-Bridge Driver for Isolated Supplies

Overview

Technical Documents

Ordering Info

Status

Active: In Production.

Description

The MAX253 monolithic oscillator/power-driver is specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. The device drives a center-tapped transformer primary from a 5V or 3.3V DC power supply. The secondary can be wound to provide any isolated voltage needed at power levels up to 1W.

The MAX253 consists of a CMOS oscillator driving a pair of N-channel power switches. The oscillator runs at double the output frequency, driving a toggle flip-flop to ensure 50% duty cycle to each of the switches. Internal delays are arranged to ensure break-before-make action between the two switches.

The SD pin puts the entire device into a low-power shutdown state, disabling both the power switches and oscillator.

Data Sheet

Download	Rev 2	(PDF, 544kB)
E-Mail

Key Features

Power-Supply Transformer Driver for Isolated RS-485/RS-232 Data-Interface Applications
Single 5V or 3.3V Supply
Low-Current Shutdown Mode: 0.4µA
Pin-Selectable Frequency: 350kHz or 200kHz
8-Pin DIP, SO, and µMAX® Packages

Applications/Uses

Bridge Ground Differentials
High Noise-Immunity Communications Interface
Isolated and/or High-Voltage Power Supplies
Isolated RS-485/RS-232 Power Supply
Medical Equipment
Process Control
Transformer Driver

Key Specifications:

Isolated Power Supplies

Part Number

V_IN
(V)

Topology

Feedback

Freq.
(kHz)

I_CC
(mA)

Oper. Temp.
(°C)

Budgetary Price

min

max

min

max

See Notes

MAX253

2.5

Half-Bridge

Push-Pull

Open Loop

350

0.45

-55 to +125

-40 to +85

0 to +70

$1.24 @1k

See All Isolated Power Supplies (20)

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Diagram

Typical Operating Circuit

Application Notes

Tutorial 658		Choose the Right Ultra-Thin DC-DC Converter for a Compact PCMCIA Card
Application Note 674		Push-Pull Driver Provides Isolated 5V at 1A
Tutorial 1167		Practical Aspects of EMI Protection
Application Note 1923		Draw 150mW of Isolated Power from Off-Hook Phone Line
Application Note 2116		RS-485 Data Interface Gives Isolated, Full-Duplex Operation
Application Note 4620		Set Your Holiday Lights to Music
Tutorial 4991		Oops...Practical ESD Protection vs. Foolhardy Placebos
Application Note 4992		Reduce the Chances of Human Error: Part 1, Power and Ground
Tutorial 4993		Reduce the Chances of Human Error: Part 2, Super Amps and Filters for Analog Interface
Brochure 5088		36V H-Bridge Transformer Driver Provides Isolated Power for Meters

Reliability Reports

Reliability Report:	MAX253.pdf
Show FIT data for:

Software/Models

MAX253 Macromodel

Ordering Information

Filters:

Part Number:

Package:

Temperature:

Tape and Reel

Sample

Part Number	Free Sample	Buy	Status	Recommended Replacement	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MAX253C/D			Active		DICE SALES;NA pin;DICE; Land Pattern: Not Applicable Use pkgcode/variation: DICE*		See data sheet
MAX253CPA			Active		PDIP(N);8 pin;79.7 mm² Outline Drawing:21-0043 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P8-1*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253CPA+			Active		PDIP(N);8 pin;79.7 mm² Outline Drawing:21-0043 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P8+1*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253CSA			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-4*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253CSA+			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253CSA+T			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253CSA-T			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-4*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253CUA			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8-1*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253CUA+			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8+1*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253CUA+T			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8+1*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
Part Number	Free Sample	Buy	Status	Recommended Replacement	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MAX253CUA-T			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8-1*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253EPA			Active		PDIP(N);8 pin;79.7 mm² Outline Drawing:21-0043 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P8-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX253EPA+			Active		PDIP(N);8 pin;79.7 mm² Outline Drawing:21-0043 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: P8+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253ESA			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-4*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX253ESA+			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253ESA+T			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253ESA-T			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-4*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
MAX253ESA/V+			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253ESA/V+T			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8+4*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253EUA			Active	MAX253CUA	µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8-1*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
Part Number	Free Sample	Buy	Status	Recommended Replacement	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
MAX253EUA+			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253EUA+T			Active		µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
MAX253EUA-T			Active	MAX253CUA	µMAX;8 pin;16.2 mm² Outline Drawing:21-0036 (PDF) Land Pattern: 90-0092 (PDF) Use pkgcode/variation: U8-1*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
MAX253MJA			Active		CDIP(N);8 pin;82.6 mm² Outline Drawing:21-0045 (PDF) Land Pattern: Not Applicable Use pkgcode/variation: J8-2*	-55°C to +125°C	RoHS/Lead-Free: No Materials Analysis
MAX253MSA/PR			Active		SOIC(N);8 pin;30.9 mm² Outline Drawing:21-0041 (PDF) Land Pattern: 90-0096 (PDF) Use pkgcode/variation: S8-4*	-55°C to +125°C	RoHS/Lead-Free: No Materials Analysis
MAX253MSA/PR-T			Active		N.SO; Land Pattern: Not Available	-55°C to +125°C	See data sheet

Notes:

Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Notes and Comments

Isolated power driver of 0.75W for RS-485

Similar Products by Function

See All Isolated Power Supplies (33 Products)

Similar Products by Application

Power Meters > Transformer Driver

Programmable Logic Controllers (PLCs) > Isolated Power Supply

Programmable Logic Controllers (PLCs) > Isolated Input/Output (I/O) Power

Programmable Logic Controllers (PLCs) > Isolated Field Power

Sensors > Isolation

Smart Grid Communications > Isolated Power

More Information

New Product Press Release

[ 2008-11-25 ]

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers
Parametric Search
Applications Help

Information Index

Overview		Technical Documents		Ordering Info		Related Products
Description Key Features Applications/Uses Key Specifications Diagram Notes and Comments		Data Sheet Application Notes Evaluation Kits Product Guides Reliability Reports Software/Models		Price and Availability Samples Buy Online Package Information Lead-Free Information		Similar Products by Function Similar Products by Application Evaluation Kits Products with Similar Part Numbers Products Used With This

Document Ref.: 19-0226 Rev 2; 2010-05-25
This page last modified: 2010-05-25