This low-voltage (1.7V to 3.7V) digital thermometer
and thermostat provides 9, 10, 11, or 12-bit digital
temperature readings over a -55°C to +125°C range
with ±2°C accuracy over a -25°C to +100°C range. At
power-up, the DS75LX defaults to 9-bit resolution for
software compatibility with the LM75. Communication
with the DS75LX is achieved through a simple 2-wire
serial interface. Three tri-state address pins allow up
to 27 DS75LX devices to operate on the same 2-wire
bus, which greatly simplifies distributed temperature-sensing
applications.
The DS75LX thermostat has a dedicated open-drain
output (O.S.) and programmable fault tolerance,
which allow the user to define the number of
consecutive error conditions that must occur before
O.S. is activated. There are two thermostatic
operating modes that control thermostat operation
based on user-defined trip-points (TOS and THYST).
Key Features
Applications/Uses
1.7V to 3.7V Operating Range
Tri-State Address Pins Allow Up to 27 Unique Bus Addresses
Temperature Measurements Require No External Components
Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
±2°C Accuracy from -25°C to +100°C
Thermometer Resolution Is User-Configurable from 9 (Default) to 12 Bits (0.5°C to 0.0625°C Resolution)
9-Bit Conversion Time is 25ms (max)
Thermostatic Settings are User-Definable
Data is Read/Written Through 2-Wire Serial Interface (SDA and SCL Pins)
Data Lines Filtered Internally for Noise Immunity (50ns Deglitch)
Bus Timeout Feature Prevents Lockup Problems on 2-Wire Interface
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail