The DS1923 temperature/humidity logger iButton® is a
rugged, self-sufficient system that measures
temperature and/or humidity and records the result in
a protected memory section. The recording is done at
a user-defined rate. A total of 8192 8-bit readings or
4096 16-bit readings taken at equidistant intervals
ranging from 1s to 273hrs can be stored. In addition to
this, there are 512 bytes of SRAM for storing
application-specific information and 64 bytes for
calibration data. A mission to collect data can be
programmed to begin immediately, or after a userdefined
delay or after a temperature alarm. Access to
the memory and control functions can be passwordprotected.
The DS1923 is configured and
communicates with a host-computing device through
the serial 1-Wire® protocol, which requires only a single
data lead and a ground return. Every DS1923 is
factory-lasered with a guaranteed unique 64-bit
registration number that allows for absolute
traceability. The durable stainless-steel package is
highly resistant to environmental hazards such as dirt,
moisture, and shock. Accessories permit the DS1923
to be mounted on almost any object, including
containers, pallets and bags.
Key Features
Applications/Uses
Digital Hygrometer Measures Humidity with 8-Bit (0.6%RH) or 12-Bit (0.04%RH) Resolution
Operating Range: -20°C to +85°C; 0 to 100%RH (see Safe Operating Range)
Automatically Wakes Up, Measures Temperature and/or Humidity and Stores Values in 8KB of Datalog Memory in 8- or 16-Bit Format
Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution
Temperature Accuracy Better than ±0.5°C from -10°C to +65°C with Software Correction
Built-in Humidity Sensor for Simultaneous Temperature and Humidity Logging
Capacitive Polymer Humidity-Sensing Element
Hydrophobic Filter Protects Sensor Against Dust, Dirt, Contaminants, and Water Droplets/Condensation
Sampling Rate from 1s up to 273hrs
Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
Programmable High and Low Trip Points for Temperature and Humidity Alarms
Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
512 Bytes of General-Purpose Memory Plus 64 Bytes of Calibration Memory
Two-Level Password Protection of All Memory and Configuration Registers
Communicates to Host with a Single Digital Signal at Up to 15.4kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol
Individually Calibrated in a NIST-Traceable Chamber
Calibration Coefficients for Temperature and Humidity Factory Programmed into Nonvolatile (NV) Memory
Meets UL#913 (4th Edit.). Intrinsically Safe Apparatus: Approved Under Entity Concept for Use in Class I, Division 1, Group A, B, C and D Locations
Environmental Studies/Monitoring
Temperature and Humidity Logging in Food Preparation and Processing
Transportation of Temperature- and Humidity-Sensitive Goods, Industrial Production
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail
